No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display config lock

display config lock

Function

The display config lock command displays lock information about the system configuration.

Format

display config lock

Parameters

None

Views

All views

Default Level

2: Configuration level

Usage Guidelines

The information includes whether the system configuration is locked and the lock duration If you cannot configure the Router after login, run this command. The command output helps you locate faults. If the system configuration is locked, the command output includes the following: type, name, and IP address of the user who locks the configuration. If no IP address is available, locked user IP address is blank.

If the current system configuration is locks by a user (user A), only users at the same level as or higher level than user A can query user A information. If users at a lower level queries user A information, the system displays a message indicating that the system configuration is locked by a user with a higher level.

Example

# Display lock information about the system configuration (when configuration is not locked).

<Huawei> display config lock 
  ------------------------------------------------------------------------------  
  automatically unlocked interval(minute): 5        
  locked state:                            unlocked                                                                                 
  ------------------------------------------------------------------------------  
Table 2-21  Description of the display config lock command output

Item

Description

automatically unlocked interval(minute)

Interval after which the system automatically unlocks the configuration, in minutes.

locked state

Whether the system configuration is locked. The values are as follows:
  • locked: indicates that the system configuration is locked.
  • unlocked: indicates that the system configuration is not locked.

# Display lock information about the system configuration (when configuration is locked).

<Huawei> display config lock 
------------------------------------------------------------------------------
  automatically unlocked interval(minute): 5
  locked state:                            locked
  locked user type:                        telnet
  locked user name:                        huawei
  locked user IP address:                  192.168.0.1
------------------------------------------------------------------------------
Table 2-22  Description of the display config lock command output

Item

Description

automatically unlocked interval(minute)

Interval after which the system automatically unlocks the configuration, in minutes.

locked state

Whether the system configuration is locked. The values are as follows:
  • locked: indicates that the system configuration is locked.
  • unlocked: indicates that the system configuration is not locked.

locked user type

Type of the user who locks the system configuration. The user can be any of the following types: NMS user, serial port user, Telnet user, and web user.

locked user name

Name of the user who locks the system configuration.

locked user IP address

IP address of the user who locks the system configuration. If no IP address is available, locked user IP address is blank.

Related Topics
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 48283

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next