No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
acl logging

acl logging

Function

The acl logging command sets the update interval and aging timeout for the simplified ACL log.

By default, the update interval and aging timeout of the simplified ACL log are 900 seconds.

Format

acl logging { timeout | update } { interval | default }

Parameters

Parameter Description Value
timeout

Indicates the aging timeout of the simplified ACL log.

-

update

Indicates the update interval of the simplified ACL log.

-

interval

Specifies the value of update interval or aging timeout.

The value is an integer that ranges from 30 to 65535, in seconds.

default

Restores the default update interval or aging timeout.

-

Views

System view

Default Level

2: Configuration level

Usage Guidelines

After simplified ACL is configured, the device periodically (300 seconds earlier or later than the update interval) prints the simplified ACL log entries that have not been aged out. You can check information about the packets matching the simplified ACL. You can use this command to set the update interval and aging timeout of the simplified ACL log.

Example

# Set the update interval of the simplified ACL log to 300 seconds.

<Huawei> system-view
[Huawei] acl logging update 300
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 53068

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next