No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ipsec authentication sha2 compatible enable

ipsec authentication sha2 compatible enable

Function

The ipsec authentication sha2 compatible enable command enables SHA-2 to be compatible with RFC standard algorithm versions.

The undo ipsec authentication sha2 compatible enable command disables SHA-2 from being compatible with RFC standard algorithm versions.

By default, the SHA-2 algorithm is not compatible with RFC standard algorithm versions.

Format

ipsec authentication sha2 compatible enable

undo ipsec authentication sha2 compatible enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When IPSec uses the SHA-2 algorithm, if the devices on two ends of an IPSec tunnel are from different vendors or run different software versions, they may use different encryption and decryption methods. In this situation, traffic between devices is interrupted.

To solve this problem, run the ipsec authentication sha2 compatible enable command to enable SHA-2 to be compatible with RFC standard algorithm versions.

Example

# Enable the SHA-2 algorithm to be compatible with RFC standard algorithm versions.

<Huawei> system-view
[Huawei] ipsec authentication sha2 compatible enable
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 52185

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next