No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
aaa authorization

aaa authorization

Function

The aaa authorization command configures AAA RADIUS server authorization.

The undo aaa authorization command cancels AAA RADIUS server authorization.

By default, AAA RADIUS server authorization is not configured.

Format

aaa authorization [ domain domain-name ]

undo aaa authorization

Parameters

Parameter

Description

Value

domain domain-name

Specifies the domain name.

The domain name must already exist.

Views

IKE peer view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When the remote device establishes an IKE SA with the server, you can run this command on the server to enable AAA RADIUS server authorization. If the domain parameter is specified, the remote device obtains authorization information using the specified domain. If the domain parameter is not specified, the remote device obtains authorization information using the domain name it sends to the server. The domain name is specified using the service-scheme command in the Efficient VPN policy view.

Prerequisite

A domain has been created using the domain (AAA view) command.

Precautions

After you configure this command on the server, the service-scheme command does not take effect.

Example

# Set the domain name for AAA RADIUS server authorization to abc.

<Huawei> system-view
[Huawei] aaa
[Huawei-aaa] domain abc
[Huawei-aaa-domain-abc] quit
[Huawei] ike peer p1 v1
[Huawei-ike-peer-p1] aaa authorization domain abc
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 90161

Downloads: 124

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next