No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
autostart run

autostart run


The autostart run command configures a device to immediately start the Auto-Start process.


autostart run




Autostart view

Default Level

3: Management level

Usage Guidelines

When the Auto-Start process fails, you can modify file server parameters or reconfigure the intermediate file and file server, and run this command to configure the device to immediately start the Auto-Start process.


# Configure the device to immediately start the Auto-Start process.
<Huawei> system-view
[Huawei] autostart
[Huawei-autostart] autostart run
Are you sure to run autostart function? (Please set autostart config first.)[Y/N]: y                                             
Info: Autostart function run.
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 90159

Downloads: 124

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next