No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The description command configures the description of an ACL.

The undo description command deletes the description of an ACL.

By default, no description is configured for an ACL.


description text

undo description






Describes an ACL.

The value is a string of 1 to 127 case-sensitive characters with spaces supported.


ACL view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The description command configures the description of an ACL, for example, the usage or application scenario of the ACL. It is used to differentiate ACLs.


The ACL to be described has been created.

Configuration Impact

If you run the description command multiple times in the same ACL view, only the latest configuration takes effect.


# Configure the description of ACL 2100.

<Huawei> system-view
[Huawei] acl 2100
[Huawei-acl-basic-2100] description This acl is used in QoS policy
[Huawei-acl-basic-2100] display acl 2100
Basic ACL 2100, 0 rule                                                                                                              
This acl is used in QoS policy                                                                                                      
ACL's step is 5  

# Configure the description of ACL6 2100.

<Huawei> system-view
[Huawei] acl ipv6 2100
[Huawei-acl6-basic-2000] description This acl6 is used in QoS policy
[Huawei-acl6-basic-2100] display acl ipv6 2100
Basic IPv6 ACL 2100, 0 rule                                                                                                         
This acl6 is used in QoS policy                                                                                                     
Acl's step is 5   
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 103228

Downloads: 131

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next