No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poe-power utilization-threshold

poe-power utilization-threshold


The poe-power utilization-threshold command sets the alarm threshold of PoE power consumption.

The undo poe-power utilization-threshold command restores the default alarm threshold of PoE power consumption.

By default, the alarm threshold of PoE power consumption is 90%.


poe-power utilization-threshold threshold-value






Specifies the percentage of PoE power consumption to the total PoE power.

The value is an integer, in percentage. It is limited by the percentage of the reserved PoE power to the total PoE power.

The default value is 90.

Usage Guidelines

When the power consumption of PDs exceeds the configured alarm threshold, the device generates an alarm to instruct users to reduce the power consumption of PDs. If the total PoE power is 1600 W and the configured alarm threshold is 90%, an alarm is generated when the power consumption is greater than 1440 W. When the power consumption falls below 1440 W, the alarm is cleared.


# Set the alarm threshold of PoE power consumption to 80% of the total PoE power.

[Huawei] poe-power utilization-threshold 80
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 135817

Downloads: 148

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next