No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
console idle-timeout

console idle-timeout

Function

The console idle-timeout command configures the serial interface timeout time of a PoE midspan.

By default, the serial interface timeout time of a PoE midspan is 300s.

Format

console idle-timeout { never | default }

Parameters

Parameter

Description

Value

never

Indicates that the serial interface will never time out. That is, the serial interface will never be locked.

-

default

Specifies the serial interface timeout time as 300s. That is, the serial interface will be locked if you do not perform any operation within 300s.

-

Usage Guidelines

Generally, you can connect the serial interface of a PC to the console interface of the device to log in to a PoE midspan. By default, the serial interface will be automatically locked if you do not perform any operation within 300s. When this occurs, to log in to the PoE midspan again, you need to enter the user name and password again. If you expect that the serial interface will never be locked, specify the never parameter.

To ensure security, you are advised to set the serial interface timeout time.

Example

# Configure the serial interface of a PoE midspan to never time out.

[Huawei] console idle-timeout never
Info: The terminal will remain in the login state, leading to security risks.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 48438

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next