No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

AR500, AR510, and AR530 V200R007

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
http server enable

http server enable

Function

The http server enable command enables the HTTP server function.

The undo http server enable command disables the HTTP server function.

By default, the HTTP server function is enabled.

Format

http server enable

undo http server enable

Parameters

None

Views

System view

Default Level

3: Management level

Usage Guidelines

After running the http server enable command to enable the HTTP server, you can use the browser to access the web NMS to manage devices.

If the web page to load does not exist, the HTTP service cannot be enabled.

Example

# Enable the HTTP server.

<Huawei> system-view
[Huawei] http server enable
Translation
Download
Updated: 2019-02-18

Document ID: EDOC1000097293

Views: 37363

Downloads: 101

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next