No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
patch delete all

patch delete all


The patch delete all command deletes patches on the current system.


patch delete all




User view

Default Level

3: Management level

Usage Guidelines

  • If you find errors in patches that have been loaded to the system, run this command to delete the patches to prevent patch errors from affecting system operating.
  • Before loading a non-incremental patch, run this command to delete the existing patches (if any). Otherwise, the non-incremental patch cannot be loaded.


# Delete all patches.

<Huawei> patch delete all
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 149788

Downloads: 168

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next