No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
patch delete all

patch delete all

Function

The patch delete all command deletes patches on the current system.

Format

patch delete all

Parameters

None

Views

User view

Default Level

3: Management level

Usage Guidelines

  • If you find errors in patches that have been loaded to the system, run this command to delete the patches to prevent patch errors from affecting system operating.
  • Before loading a non-incremental patch, run this command to delete the existing patches (if any). Otherwise, the non-incremental patch cannot be loaded.

Example

# Delete all patches.

<Huawei> patch delete all
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 49301

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next