No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
qos group

qos group

Function

The qos group command configures the QoS group to which the IPSec packets belong.

The undo qos group command deletes the QoS group to which the IPSec packets belong.

By default, no QoS group is configured.

Format

qos group qos-group-value

undo qos group

Parameters

Parameter

Description

Value

qos-group-value

Specifies the ID of the QoS group.

The value is an integer that ranges from 1 to 99.

Views

Manual IPSec policy view, IPSec policy view, IPSec policy template view, IPSec profile view, Efficient VPN policy view, GDOI policy view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When both an IPSec policy and a QoS policy are used on an interface, you can run this command to specify the QoS group to which the IPSec packets belong to facilitate QoS management.

Follow-up Procedure

After QoS for IPSec packets is enabled, run the if-match qos-group qos-group-value command in the traffic classifier view to configure a matching rule based on the QoS group.

Example

# Configure the QoS group to which the IPSec packets belong in the IPSec policy view.

<Huawei> system-view
[Huawei] ipsec policy policy1 10 isakmp
[Huawei-ipsec-policy-isakmp-policy1-10] qos group 30
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 48049

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next