No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poe force-power port

poe force-power port


The poe force-power port command enables forcible power supply on a port.

The undo poe force-power port command disable forcible power supply on a port.

By default, forcible power supply is disabled on a port.


poe force-power port port-num

undo poe force-power port port-num


Parameter Description Value
port-num Specifies the port number of a PoE midspan. The value is an integer that ranges from 0 to 7.

Usage Guidelines

If the system power is sufficient, you can run this command on the port connected to a non-standard PD to provide power to the PD when the PSE cannot detect the PD.


# Enable forcible power supply on port 0.

[Huawei] poe force-power port 0
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 133745

Downloads: 142

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next