No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dn

dn

Function

The dn command specifies the distinguished name (DN) of an allowed peer for IKE negotiation.

The undo dn command deletes the DN of an allowed peer.

By default, no DN of allowed peer for IKE negotiation is configured.

Format

dn name

undo dn name

Parameters

Parameter

Description

Value

name

Specifies the DN of an allowed peer for IKE negotiation.

The value is a string of 1 to 255 case-sensitive characters without spaces.

Views

Identity filter set view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run this command to specify an allowed peer based on the DN (PKI domain configuration referenced in the IKE peer configured on a remote device) in the identity filter set for IKE negotiation.

Precautions

An IPSec tunnel can be established only when the remote end matches one or more parameters in the identity filter set and the IPSec negotiation parameters at both ends are consistent.

If you run this command in the same view multiple times, the latest configuration does not override earlier ones.

Example

# Set the name of the allowed peer for IKE negotiation to huawei.

<Huawei> system-view
[Huawei] ike identity identity1
[Huawei-ike-identity-identity1] dn c=cn,st=jiangsu,l=nanjing,o=huawei,ou=vpn,cn=ipsec
Related Topics
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 89770

Downloads: 122

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next