No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display patch-information

display patch-information

Function

The display patch-information command displays information about the patch in the current system.

Format

display patch-information

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After a patch is loaded or deleted, run this command to view information about the patch, including its version, name.

Example

# Display information about the patch in the current system.

<Huawei> display patch-information
Patch version         :ARV200R007C00SPC650                                                                                          
Patch package name    :flash:/patch_ar160a.pat                                                                                      
The state of the patch state file is:Running                                                                                        
The current state is:Running                                                                                                        
******************************************************************                                                                  
*              The patch information,as follows                  *                                                                  
******************************************************************                                                                  
Type        State         Count          Time(YYYY-MM-DD HH:MM:SS)                                                                  
------------------------------------------------------------------                                                                  
vrp         Running       1              2008-01-12 14:26:18+00:00                                                                  
nge         Running       1              2008-01-12 14:26:19+00:00                                                                  
soft        Running       1              2008-01-12 14:26:21+00:00  
Table 2-60  Description of the display patch-information command output

Item

Description

Patch version Version of the patch.
Patch package name Name of the patch file.

The state of the patch state file is

Status of the patch file.

The current state is

Current status of the patch.

Type

Patch type.
  • VRP: VRP patch for the MPU.

  • CAP: CAP patch for the MPU.

  • Kernel: Patch for the kernel.

  • LPU: Patch for the LPU.

  • soft: Patch for the software.

  • nge: Patch for the Intelligent Awareness Engine (IAE).

State

Running status of the patch. (Running: The patch is running.)

Count

Number of patch units.

Time(YYYY-MM-DD HH:MM:SS)

Time when the patch takes effect.

Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 89019

Downloads: 122

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next