No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display poe-power

display poe-power

Function

The display poe-power command displays PoE power supply information.

Format

display poe-power

Parameters

None

Usage Guidelines

The display poe-power command displays PoE power supply information, including the system available power, percentage of the reserved PoE power, power alarm threshold, and PoE power module information.

Example

# Display PoE power supply information.
[Huawei] display poe-power
 Available power value(mW)    : 104000                                          
 Power Utilization-threshold  : 90%                                             
 Reserved power percent       : 20%                                             
 POE power 1 :
 Power    value(mW): 130000                                                     
 Voltage  value(V) : 53                                                         
 Current  value(mA) : 0  
Table 3-64  Description of the display poe-power command output

Item

Description

Available power value(mW)

System available PoE power, in mW.

Power Utilization-threshold

Alarm threshold of PoE power consumption, in percentage.

To configure this parameter, run the poe-power utilization-threshold command.

Reserved power percent

Reserved PoE power, in percentage.

To configure this parameter, run the poe power-reserved command.

POE power 1

Power supply status of the first board on the PoE power supply. A PoE midspan has only one board.

Power value(mW)

Power provided by the PoE power supply, in mW.

Voltage value(V)

Current voltage of the PoE power supply, in V.

Current value(mA)

Current of the PoE power supply, in mA.

Related Topics
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 89793

Downloads: 122

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next