No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ike-peer

ike-peer

Function

The ike-peer command references an IKE peer.

The undo ike-peer command cancels the configuration.

By default, no IKE peer is referenced.

Format

ike-peer peer-name

undo ike-peer

Parameters

Parameter

Description

Value

peer-name

Specifies the name of the referenced IKE peer.

The value is an existing IKE peer name.

Views

IPSec policy view, IPSec policy template view, IPSec profile view, GDOI policy view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When you configure IKE negotiation, you need to reference an IKE peer in the specified view.

Prerequisites

An IKE peer has been created using the ike peer command in the system view.

Example

# Reference the IKE peer mypeer in an IPSec policy.
<Huawei> system-view
[Huawei] ike peer mypeer v1
[Huawei-ike-peer-mypeer] quit
[Huawei] ipsec policy map1 10 isakmp
[Huawei-ipsec-policy-isakmp-map1-10] ike-peer mypeer
# Reference the IKE peer mypeer in an IPSec profile.
<Huawei> system-view
[Huawei] ike peer mypeer v1
[Huawei-ike-peer-mypeer] quit
[Huawei] ipsec profile profile1
[Huawei-ipsec-profile-profile1] ike-peer mypeer
# Reference the IKE peer mypeer in the GDOI policy.
<Huawei> system-view
[Huawei] ike peer mypeer v1
[Huawei-ike-peer-mypeer] quit
[Huawei] ipsec policy map2 10 gdoi
[Huawei-ipsec-policy-gdoi-map2-10] ike-peer mypeer
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 90206

Downloads: 124

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next