No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ipsec efficient-vpn (interface view)

ipsec efficient-vpn (interface view)


The ipsec efficient-vpn command binds an Efficient VPN policy to an interface.

The undo ipsec efficient-vpn command deletes the Efficient VPN policy from an interface.

By default, no Efficient VPN policy is applied to an interface.


ipsec efficient-vpn efficient-vpn-name

undo ipsec efficient-vpn






Specifies the name of an Efficient VPN policy.

The value is an existing Efficient VPN policy name.


Interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When many branches and traveling staff connect to the headquarters over IPSec tunnels, similar or duplicate IPSec configurations and other network resource configurations must be configured on the branch and headquarters gateways. The Efficient VPN solution uses centralized IPSec configurations on the headquarters gateway and simplified IPSec configuration on each branch gateway. This solution reduces the manual configuration workload, and facilitates IPSec VPN configuration and maintenance.


An Efficient VPN policy has been created using the ipsec efficient-vpn (system view) command.


If an Efficient VPN policy is used to establish an IPSec tunnel between the enterprise branch and headquarters, apply the Efficient VPN policy to the branch gateway and use an IPSec policy template on the headquarters gateway to create an IPSec policy.


# Apply the Efficient VPN policy named evpn to Ethernet 1/0/0.

<Huawei> system-view
[Huawei] interface ethernet 1/0/0
[Huawei-Ethernet1/0/0] ipsec efficient-vpn evpn
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 149600

Downloads: 168

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next