No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

AR500, AR510, and AR530 V200R007

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
proposal

proposal

Function

The proposal command references an IPSec proposal.

The undo proposal command deletes the referenced IPSec proposal.

By default, no IPSec proposal is referenced.

Format

proposal proposal-name

undo proposal [ proposal-name ]

Parameters

Parameter

Description

Value

proposal-name

Specifies the name of an IPSec proposal.

The value is an existing IPSec proposal name.

Views

Manual IPSec policy view, IPSec policy view, IPSec policy template view, IPSec profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The proposal command references an IPSec proposal in an IPSec policy.

Prerequisites

An IPSec proposal has been created using the ipsec proposal command.

Precautions
  • If the manual mode is used, the IPSec policy can reference only one IPSec proposal. To reference another IPSec proposal, you must cancel the previous proposal.

  • If the IKE negotiation mode is used, an IPSec policy can reference a maximum of 12 IPSec proposals. During IKE negotiation, the two ends of the IPSec tunnel first use the IPSec proposals with the same parameter settings. If IPSec proposals with the same parameter settings cannot be found, an SA cannot be set up.

  • An IPSec profile can reference a maximum of 12 IPSec proposals.
To delete the referenced IPSec proposal, run the command undo proposal in manual IPSec policy view, or run the command undo proposal [ proposal-name ] in other views.

Example

# Create an IPSec proposal prop1 and configure it to use the default parameters. Then reference the IPSec proposal in IPSec policy policy1.
<Huawei> system-view
[Huawei] ipsec proposal prop1
[Huawei-ipsec-proposal-prop1] quit
[Huawei] ipsec policy policy1 100 manual
[Huawei-ipsec-policy-manual-policy1-100] proposal prop1
# Create an IPSec proposal prop1 and configure it to use the default parameters. Then reference the IPSec proposal in IPSec profile profile1.
<Huawei> system-view
[Huawei] ipsec proposal prop1
[Huawei-ipsec-proposal-prop1] quit
[Huawei] ipsec profile profile1
[Huawei-ipsec-profile-profile1] proposal prop1
Translation
Download
Updated: 2019-02-18

Document ID: EDOC1000097293

Views: 37768

Downloads: 101

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next