No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poe power-max

poe power-max

Function

The poe power-max command sets the maximum output power of the device.

The undo poe power-max command restores the default maximum output power of the device.

By default, the maximum output power of the device is 130000 mW. The configured maximum output power must be smaller than or equal to the total power of PoE power supplies.

Format

poe power-max power-max

undo poe power-max

Parameters

Parameter

Description

Value

power-max

Specifies the maximum output power.

The value is an integer that ranges from 0 to 130000, in mW.

Usage Guidelines

Usage Scenario

By default, how much PoE power that the device can provide depends on the voltage of your network. You can run the poe power-max command to configure the maximum output power for the device. This configuration ensures that the device provides stable PoE power when the total power of the device is insufficient.

Precautions

If the configured maximum output power is smaller than the total power required by PDs, low-priority PDs will be powered off or PDs cannot be manually powered on.

Example

# Set the maximum output power of the device to 100000 mW.
[Huawei] poe power-max 100000

Warning: This operation may power off some PD.Continue?[Y/N]:y
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 90853

Downloads: 124

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next