No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset acl ipv6 counter

reset acl ipv6 counter


The reset acl ipv6 counter command clears the ACL6 statistics.


AR502G-L-D-H, AR502GR-L-D-H, AR510 series do not support IPv6 ACL.


reset acl ipv6 counter { name acl6-name | acl6-number | all }





name acl6-name

Specifies the name of an ACL6 whose statistics need to be cleared.

The value is a string of 1 to 32 case-sensitive characters without spaces. The value must start with a letter (a to z or A to Z, case sensitive).


Specifies the number of an ACL6 whose statistics need to be cleared.

The value is an integer that ranges from 2000 to 3999.

  • ACL6s numbered 2000 to 2999 are basic ACL6s.
  • ACL6s numbered 3000 to 3999 are advanced ACL6s.


Clears all the ACL6 statistics.



User view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To obtain the accurate ACL6 statistics in a certain period, run the reset acl ipv6 counter command to clear existing statistics and start statistics collection.

Before using the reset acl ipv6 counter command, determine whether you intend to clear ACL6 statistics.

After the reset acl ipv6 counter command is executed, the system does not prompt you the statistics deletion.

Follow-up Procedure

After running the reset acl ipv6 counter command to clear the previous ACL statistics, you can use the display acl ipv6 command to view ACL rules and statistics on the packets matching the ACL rules in the current period.


# Clear the statistics about basic ACL6 2000.

<Huawei> reset acl ipv6 counter 2000
Related Topics
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 102523

Downloads: 131

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next