No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
inband ocsp

inband ocsp

Function

The inband ocsp command enables the device to verify certificate validity through the OCSP server in an IKEv2 scenario.

The undo inband ocsp command disables the device from verifying certificate validity through the OCSP server in an IKEv2 scenario.

By default, the device does not verify certificate validity through the OCSP server in an IKEv2 scenario.

Format

inband ocsp

undo inband ocsp

Parameters

None

Views

IKE peer view, Efficient VPN policy view

Default Level

2: Configuration level

Usage Guidelines

When IKEv2 is used for IPSec tunnel establishment and a digital certificate is used for identity authentication, you can run the inband ocsp command to enable the device to send an online certificate status authentication request to the OCSP server. The OCSP server will reply a message, indicating that the license is valid, expired, or unknown. If the replied message does not indicate valid license, identity authentication fails and the IPSec tunnel cannot be established.

The command setting takes effect only when certificate-check is set to ocsp in the PKI domain.

Example

# Enable the device to verify certificate validity through the OCSP server in an IKEv2 scenario.
<Huawei> system-view
[Huawei] ike peer huawei v2
[Huawei-ike-peer-huawei] inband ocsp
# Enable the device to verify certificate validity through the OCSP server in an IKEv2 scenario.
<Huawei> system-view
[Huawei] ipsec efficient-vpn evpn mode client
[Huawei-ipsec-efficient-vpn-evpn] inband ocsp
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 48404

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next