No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
language character-set

language character-set

Function

The language character-set command configures the character set in the system.

The default character set in the system is ISO8859-1, that is, the system only supports English input.

Format

language character-set character

Parameters

Parameter Description Value
character Specifies the character set in the system. Currently, the system supports the following character sets: GBK, UTF-8, and ISO8859-1.

Views

System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

You can configure the character set so that the system just supports Chinese or supports Chinese and English input. The character set facilitates device identification and management, for example, Chinese interface description can be configured.

Currently, the system supports the following character sets: GBK, UTF-8, and ISO8859-1. GBK and UTF-8 support both English and Chinese input, whereas ISO8859-1 supports only English input. GBK is a Chinese character set and UTF-8 is an international character set. To enter Chinese characters on the device, configure GBK or UTF-8 according to the character set supported on the terminal login software.

Precaution

The character set supported by the terminal login software affects the display of Chinese characters. If the character sets in the system and on the terminal login software are different, Chinese characters may be displayed as garbled characters.

After the character set function is configured, the device cannot work together with eSight or iManager U2000. The web system only displays the UTF-8 character set and does not support Chinese input.

Example

# Configure GBK as the character set in the system.

<Huawei> system-view
[Huawei] language character-set GBK
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 48401

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next