No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

AR500, AR510, and AR530 V200R007

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
bandwidth (Interface view)

bandwidth (Interface view)

Function

The bandwidth command sets the interface bandwidth obtained by the NMS from the MIB.

The undo bandwidth command restores the default configuration.

By default, the interface bandwidth obtained by the NMS from the MIB depends on the interface type. For example, the bandwidth of a GE interface is 1000 Mbit/s.

Format

bandwidth bandwidth [ kbps ]

undo bandwidth

Parameters

Parameter Description Value
bandwidth Specifies the bandwidth of an interface. The value is an integer ranging from 1 to 1000000, and the default unit is Mbit/s.
kbps

Indicates the unit of an interface bandwidth is kbit/s.

If kbps is not specified, the unit of an interface bandwidth is Mbit/s.

-

Views

Interface view

Default Level

2: Configuration level

Usage Guidelines

The bandwidth command mainly ensures that the network management station (NMS) can acquire the bandwidth of an interface. The NMS can check the interface bandwidth through the two objects ifSpeed and ifHighSpeed in IF-MIB.
  • If the configured bandwidth is smaller than 4000 Mbit/s, ifSpeed and ifHighSpeed are respectively displayed as bandwidth x 1000 x 1000 and bandwidth.
  • If the configured bandwidth is equal to or larger than 4000 Mbit/s, ifSpeed and ifHighSpeed are respectively displayed as 4294967295 (0XFFFFFFFF) and bandwidth.

Example

# Set the bandwidth of Eth1/0/0 to 100 Mbit/s.

<Huawei> system-view
[Huawei] interface ethernet 1/0/0
[Huawei-Ethernet1/0/0] bandwidth 100
Translation
Download
Updated: 2019-02-18

Document ID: EDOC1000097293

Views: 36773

Downloads: 101

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next