No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
autostart enable

autostart enable


The autostart enable command enables Auto-Start on a device.

The undo autostart enable command disables Auto-Start on a device.

By default, Auto-Start is disabled on a device.


autostart enable

undo autostart enable




System view

Default Level

3: Management level

Usage Guidelines

You can run this command to enable Auto-Start. You can use Auto-Start to deploy or upgrade a device only after enabling Auto-Start.


# Enable Auto-Start.
[Huawei] autostart enable
Info: Enable autostart successfully.
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 91990

Downloads: 124

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next