No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

AR500, AR510, and AR530 V200R007

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display interface tunnel-template

display interface tunnel-template

Function

The display interface tunnel-template command displays information about a tunnel template interface.

Format

display interface tunnel-template [ interface-number | main ]

Parameters

Parameter Description Value
interface-number Specifies the number of a tunnel template. The value is an integer ranging from 0 to 1023.
main

Displays information about only a tunnel template interface.

If a tunnel template interface has no sub-interface, the information about the tunnel template interface is displayed regardless of whether the main parameter is specified.

-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

None.

Example

# Displays information about Tunnel template 0.

<Huawei> display interface tunnel-template 0
Tunnel-Template0 current state : UP                                             
Line protocol current state : DOWN                                              
Description:ith                                                                 
Route Port,The Maximum Transmit Unit is 1500                                    
Internet Address is unnumbered, using address of LoopBack0(192.1.1.1/32)      
Encapsulation is TUNNEL, loopback not set                                       
Tunnel protocol IPSEC                                                           
Current system time: 2013-10-24 14:58:00                                        
    300 seconds input rate 0 bits/sec, 0 packets/sec                            
    300 seconds output rate 0 bits/sec, 0 packets/sec                           
    0 seconds input rate 0 bits/sec, 0 packets/sec                              
    0 seconds output rate 0 bits/sec, 0 packets/sec                             
    0 packets input,  0 bytes                                                   
    0 input error                                                               
    0 packets output,  0 bytes                                                  
    0 output error                                                              
    Input bandwidth utilization  : --                                           
    Output bandwidth utilization : --                                           
Table 10-21  Description of the display interface tunnel-template command output

Item

Description

Tunnel-Template0 current state

Physical status of the tunnel template interface:
  • UP: The physical status of the tunnel template interface is Up.

  • DOWN: The physical status of the tunnel template interface is Down.

Line protocol current state

Link layer protocol status of the tunnel template interface:
  • UP: The link layer protocol status of the tunnel template interface is Up.

  • DOWN: The link layer protocol of the tunnel template interface is Down or no IP address is assigned to the tunnel template interface.

Description

Description of the tunnel template interface.

Route Port

Indicates that the interface is a Layer 3 interface.

The Maximum Transmit Unit is 1500

MTU of the tunnel template interface. The default MTU is 1500 bytes. If the length of a packet is greater than the MTU, it is fragmented before being sent. If fragmentation is disabled, the packet is discarded.

Internet Address is unnumbered, using address of LoopBack0 (192.1.1.1/32)

Indicates that the interface IP address is borrowed from Loopback 0 (192.1.1.1/32).

Encapsulation is TUNNEL

Indicates that the tunnel template interface encapsulates packets in tunnel mode.

loopback not set

Indicates that the loopback mode is not set for the tunnel-template interface.

Tunnel protocol IPSEC

Indicates that the tunnel encapsulation protocol is IPsec.

Current system time

Current time of the system.

If a time zone is configured and the daylight saving time begins, the time is displayed in the format of YYYY/MM/DD HH:MM:SS UTC±HH:MM DST.

300 seconds input rate 0 bits/sec, 0 packets/sec

Receive bit and packet rates on the tunnel template interface within the first 300 seconds. You can run the set flow-stat interval command to change the interval at which traffic statistics are collected. The interval must be an integer multiple of 10 and range from 10 to 600, in seconds.

300 seconds output rate 0 bits/sec, 0 packets/sec

Send bit and packet rates on the tunnel template interface within the first 300 seconds. You can run the set flow-stat interval command to change the interval at which traffic statistics are collected. The interval must be an integer multiple of 10 and range from 10 to 600, in seconds.

0 seconds input rate 0 bits/sec, 0 packets/sec

Receive bit and packet rates within the interval between two queries.

0 seconds output rate 0 bits/sec, 0 packets/sec

Send bit and packet rates within the interval between two queries.

0 packets input, 0 bytes

Total numbers of packets and bytes received by the tunnel template interface.

0 input error

Number of error packets received by the tunnel template interface.

0 packets output, 0 bytes

Total numbers of packets and bytes sent by the tunnel template interface.

0 output error

Number of error packets sent by the tunnel template interface.

Input bandwidth utilization

"--" indicates that this item is not supported.

Output bandwidth utilization

"--" indicates that this item is not supported.

Translation
Download
Updated: 2019-02-18

Document ID: EDOC1000097293

Views: 38170

Downloads: 101

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next