No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display current-configuration

display current-configuration

Function

The display current-configuration command displays the current parameter settings.

Format

display current-configuration

Parameters

None

Usage Guidelines

To check whether the configured parameter settings have taken effect, run the display current-configuration command. The parameters that do not take effect are not displayed.

Example

# Display the current parameter settings.

[Huawei] display current-configuration
                                                                                
 Power-Management mode        :  Auto                                           
 Power    value(mW)           :  130000                                         
 Power Utilization-threshold  :  90%                                            
 Reserved power percent       :  20%                                            
 Console idle timeout         :  default(300s)                                  
 Low temperature threshold    :  -40                                            
 High temperature threshold   :  85 
                                                                                
PortName                 MaxPower(mW) Enabled  Legacy   Priority                
--------------------------------------------------------------------------------
Port0                    30000        Enable   Disable  Low                     
Port1                    30000        Enable   Disable  Low                     
Port2                    30000        Enable   Disable  Low                     
Port3                    30000        Enable   Disable  Low                     
Port4                    30000        Enable   Disable  Low                     
Port5                    30000        Enable   Disable  Low                     
Port6                    30000        Enable   Disable  Low                     
Port7                    30000        Enable   Disable  Low   
Table 3-55  Description of the display current-configuration command output

Item

Description

Power-Management mode

Power management mode: automatic or manual.

To configure this parameter, run the poe power-management command.

Power value(mW)

Maximum output power of a PoE midspan, in mW.

Power Utilization-threshold

Alarm threshold of PoE power consumption, in percentage.

To configure this parameter, run the poe-power utilization-threshold command.

Reserved power percent

Reserved PoE power, in percentage.

To configure this parameter, run the poe power-reserved command.

Console idle timeout

Timeout interval of the PoE midspan's serial port.

To configure this parameter, run the console idle-timeout command.

Low temperature threshold

Lower temperature threshold of the PoE midspan, in centigrade (°C).

To configure this parameter, run the low-temperature threshold command.

High temperature threshold

Upper temperature threshold of the PoE midspan, in centigrade (°C).

To configure this parameter, run the high-temperature threshold command.

PortName

PoE midspan port name.

MaxPower(mW)

Maximum output power of a PoE midspan, in mW.

To configure this parameter, run the poe power port command.

Enabled

Whether the PoE function is enabled on a port of a PoE midspan.

To configure this parameter, run the poe enable port command.

Legacy

Whether a port of a PoE midspan is enabled to check compatibility of PDs.

To configure this parameter, run the poe legacy enable port command.

Priority

Power supply priority of a port of a PoE midspan.

To configure this parameter, run the poe priority port command.

Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 88849

Downloads: 121

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next