No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display autostart config

display autostart config

Function

The display autostart config command displays the file server configuration.

Format

display autostart config

Parameters

None

Views

System view

Default Level

3: Management level

Usage Guidelines

You can run this command to view the file server configuration on the device, including the type and IP address of the file server, and the user name and password for accessing the file server.

Example

# Display the file server configuration.

[Huawei] display autostart config                                         
Server type       :FTP
Server IP address :192.168.1.1
Username          :user1
Password          :***
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 90881

Downloads: 124

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next