No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
config unlock interval

config unlock interval

Function

The config unlock interval command configures the interval for unlocking a device.

The default interval is 5 minutes.

Format

config unlock interval time

Parameters

Parameter Description Value
time Specifies the interval for unlocking a device. The value is an integer ranging from 1 to 255, in minutes.

Views

System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

If the device configuration is clocked by the config lock command, other users cannot modify the configuration. In this case, the config unlock interval command can be used to configure the unlock interval, after which the device configuration is unlocked automatically.

Precautions

This command can be used by only the super administrator (run the user privilege command to set the user level to 15) and NMS user.

If you run the command multiple times, only the latest configuration takes effect.

The unlocking interval starts from the last time the current user configures the system.

Example

# Set the unlock interval to 2 minutes.

<Huawei>system-view
[Huawei]config unlock interval 2

# The following message is displayed when the configured unlock interval arrives.

[Huawei]
  The system config is unlocked
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 103204

Downloads: 131

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next