No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 Commands Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
observe-port

observe-port

Function

The observe-port command configures a local observing port.

The undo observe-port command deletes a local observing port.

By default, no local observing port is configured.

NOTE:

In PPPoEoA and IPoEoA scenarios, only WAN-side interfaces can be used as observing interfaces.

Format

observe-port interface interface-type interface-number

undo observe-port

Parameters

Parameter

Description

Value

interface-type interface-number

Specifies the type and number of the observing port.
  • interface-type specifies the type of the port.
  • interface-number specifies the number of the port.

-

Views

System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

If the monitoring device and monitored device are connected to the same router, run the observe-port command to configure a local observing port to monitor ports on the monitored device or traffic passing through the ports on the monitored device.

Precautions

  • Do not configure other functions on an observing port; otherwise, the mirroring function is affected.

  • If an observing port configured with the mirroring function needs to be deleted, delete the mirrored port first.

  • The management port cannot be configured as a local observing port.

  • Only LAN-side and WAN-side ports can be configured as local observing ports.

Example

# Configure Eth2/0/0 as the local observing port.

<Huawei> system-view
[Huawei] observe-port interface ethernet 2/0/0
Related Topics
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097293

Views: 49043

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next