No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AM/4/IPRENEWFAIL

AM/4/IPRENEWFAIL

Message

AM/4/IPRENEWFAIL: Failed to renew an IP address. (PoolName=[STRING], MacAddress=[STRING], IpAddress=[IPADDR], Reason=[STRING])

Description

The client failed to renew the lease of an IP address.

Parameters

Parameter Name Parameter Meaning

PoolName

Indicates the address pool name.

MacAddress

Indicates the client MAC address.

IpAddress

Indicates the IP address whose lease fails to be renewed.

Reason

Indicates the Reason why IP address lease fails to be renewed that include:
  • Bad requested IP address
  • Without the client's lease
  • Pool is locked

Possible Causes

  • The IP address whose lease needs to be renewed is different from the address assigned by the address pool to the client.
  • The client has no lease.
  • The address pool is locked.

Procedure

  • Rectify the fault according to the reason:

    • If the IP address whose lease needs to be renewed is different from the address assigned by the address pool to the client, perform the following operations to release the original client address and resend an address application request:

      When a device functions as the DHCP client, run the undo ip address dhcp-alloc command in the interface view, and then run the ip address dhcp-alloc command in the interface view.

      When a device functions as the Bootp client, run the undo ip address dhcp-alloc and ip address bootp-alloc commands in the interface view, and then run the ip address dhcp-alloc and undo ip address bootp-alloc commands in the interface view.

      When a PC functions as the client, commands for releasing an IP address vary with the operating systems. You can use either of the following methods to release an IP address:

      • Run the ipconfig/ release command on the Windows 7 operating system of the PC to release the IP address of the PC.
      • Run the winipcfg/ release command in the MS-DOS of Windows 98 to release the IP address of the PC.
    • If the client has no lease, release the original client address and resend an address application request.
    • If the address pool is locked, run the undo lock command in the address pool view to unlock the address pool after confirming the reason why the administrator locks the pool.

Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 48373

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next