No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



IGMP/6/GLB_LIMIT:In all VPN instances, the number of existed IGMP group memberships exceeded the limit. (FlCode=[STRING][ULONG])


The total number of IGMP entries in all current instances exceeded the configured limit.


Parameter Name Parameter Meaning
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that all instances were configured with the IGMP limit, this log message was generated when the total number of IGMP entries in all instances exceeded the limit.


  1. Run the igmp global limit command in the system view to adjust the maximum number of IGMP entries.
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 96162

Downloads: 35

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next