No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PPIURPF/3/URPF_PORTS_SENDERR

PPIURPF/3/URPF_PORTS_SENDERR

Message

PPIURPF/3/URPF_PORTS_SENDERR:Send [ULONG1] ports urpf msg to slotid = [ULONG2] fail.

Description

Sending URPF messages to an interface card fails.

Parameters

Parameter Name Parameter Meaning
[ULONG1] interface index.
[ULONG2] card slot ID.

Possible Causes

1.

The SRU should not send URPF messages.

2.

IPC communication fails.

Procedure

  1. Check whether the function takes effect and whether URPF messages need to be sent to the interface card.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 64739

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next