No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RIP/3/LEAVE_MCST_GRP_F

RIP/3/LEAVE_MCST_GRP_F

Message

RIP/3/LEAVE_MCST_GRP_F: Leaving RIP multicast group is unsuccessful. Total [number] occurrences since [date] [time]. (ProcessId=[ULONG], ErrorCode=[LONG])

Description

Failed to leave the RIP multicast group on the interface.

Parameters

Parameter Name Parameter Meaning
[number] Indicates the number of failed attempts to leave a RIP multicast group on an interface.
[date] Indicates the date when the last route left the RIP multicast group.
[time] Indicates the time when the last route left the RIP multicast group.
ProcessId Indicates the process ID.
ErrorCode Indicates the error code.

Possible Causes

Failed to leave the RIP multicast group on the interface.

Procedure

  1. Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 64154

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next