No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



SNMP/5/SNMP_SET:MIB node set. (User=[STRING], SourceIP=[STRING1], RequestId=[ULONG], ErrorStatus=[ULONG], ErrorIndex=[ULONG], [STRING2])


This log records an operation performed through SNMP to set a MIB object .


Parameter Name Parameter Meaning
User user name.
SourceIP Indicates the source IP address.
RequestId Indicates the operation request ID.
ErrorStatus Indicates the operation result.
ErrorIndex Indicates the error index.
[STRING2] Indicates information about the MIB object.

Possible Causes

A log is record when a user sets a MIB object using SNMP.


  • This log message is informational only, and no action is required.
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 64604

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next