No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The stamode change to [STRING1] state.(Station Mac=[STRING2], AP Mac=[STRING3],Station Access Channel=[STRING4])


This log is supported only by V200R007C00.


The state of the AR in station mode was changed.


Parameter Name Parameter Meaning
[STRING1] Indicates the state of a station.
  • scan: scanning
  • connecting: connecting
  • join: joining
  • auth: authentication
  • assoc: association
  • run: running
Station Mac Indicates the MAC address of a station.
AP Mac Indicates the MAC address of the AP.
Station Access Channel Indicates the access channel of the station.

Possible Causes

The state of the AR in station mode was changed.


  1. This log message is informational only, and no action is required.
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 69760

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next