No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RM/4/INST_RCH_MAX_RT6_LMT

RM/4/INST_RCH_MAX_RT6_LMT

Message

RM/4/INST_RCH_MAX_RT6_LMT:The number of routes in IPv6 [vpn-instance-name] was [current-number], which reached or exceeded the maximum value [max-value]. (InstanceId=[ULONG], AcceptOrRejectFlag=[STRING])

Description

The number of routes in a specific IPv6 VPN instance reached or exceeded the upper limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of an IPv6 VPN instance.
[max-value] Indicates the maximum number of routes.
[current-number] Indicates the current number of routes.
InstanceId Indicates the ID of an IPv6 VPN instance.
AcceptOrRejectFlag Indicates the flag representing whether it is allowed or rejected to add routes. The values are as follows:
  • Accept: indicates that adding routes is allowed.

  • Reject: indicates that adding routes is rejected.

Possible Causes

The number of routes in a specific IPv6 VPN instance reached or exceeded the upper limit.

Procedure

  1. Run the display ipv6 routing-table [ vpn-instance vpn-instance-name ] statistics command to check the total number and types of routes in this IPv6 VPN instance.
  2. Analyze the source of each route and check whether the number of current routes in the IPv6 VPN instance meets the requirement.

    • If so, go to Step 4.
    • If not, go to Step 3.

  3. Delete unnecessary private routes, and then check whether the number of routes still reaches or exceeds the alarm threshold.

    • If so, go to Step 5.
    • If not, go to Step 6.

  4. Enter the IPv6 VPN instance view and run the display this command to check the configuration of routing-table limit to check whether the set alarm threshold of private routes is proper.

    • If so, go to Step 5.
    • If not, run the routing-table limit number { alert-percent | simply-alert } command to reconfigure a proper alarm threshold. Then, go to Step 6.

  5. Collect log information and configuration information, and then contact technical support personnel.
  6. End.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 47788

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next