No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
EFM/6/REMOTE_STATE_CHANGED

EFM/6/REMOTE_STATE_CHANGED

Message

EFM/6/REMOTE_STATE_CHANGED:Remote equipment's state changed from [State1] to [State2]. (InterfaceName=[STRING])

Description

The status of the peer device was changed from master to slave or from slave to master.

Parameters

Parameter Name Parameter Meaning
State1 Indicates the original master/slave status of the peer device:

171: Indicates the peer device is in the master state.

186: Indicates the peer device is in the slave state.

0: Indicates that packets from the peer device do not carry information about the master/slave status, or the master/slave status cannot be obtained.

State2 Indicates the current master/slave status of the peer device:

171: indicates the peer device is in the master state.

186: indicates the peer device is in the slave state.

0: indicates that packets from the peer device do not carry information about the master/slave status, or the master/slave status cannot be obtained.

InterfaceName Indicates the interface name.

Possible Causes

1. The status of the peer device was changed from master to slave or from slave to master.

2. The peer device changed from lacking of master/slave information to taking master/slave information.

3. The master/slave status of the peer device could not be obtained owing to link faults.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 64670

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next