No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



ADP-IPSEC/4/FPI_DeleteOutBoundSa_Fail: Failed to delete outbound SAs from the forwarding plane. (SPI: [ULONG], Proto: [ULONG], peer-ip: [STRING], error code: [ULONG])


The IPSec module failed to delete outbound SAs from the forwarding plane.


Parameter Name Parameter Meaning
SPI Indicates the security parameter index (SPI).
Proto Indicates the protocol number.
peer-ip Indicates the IP address of a peer.
error code Indicates the returned error code.

Possible Causes

After the reset ipsec sa command was run in the user view or SAs were aged, the IPSec module failed to delete outbound SAs from the forwarding plane.


  • Collect log messages and contact technical support personnel.
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 108811

Downloads: 35

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next