No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SHELL/5/CMDRECORD

SHELL/5/CMDRECORD

Message

SHELL/5/CMDRECORD:Recorded command information. (Task=[string], Ip=[string], VpnName=[STRING], User=[string], AuthenticationMethod="[STRING]", Command="[string]")

SHELL/5/CMDRECORD(l): Record command information. (Task=[STRING], Ip=[STRING], User=[STRING], Command="[STRING]", Result=[STRING])

Description

The user command was recorded in the SHELL/5/CMDRECORD log.
  • If the command is successfully run, only the SHELL/5/CMDRECORD log is recorded.
  • If the command is not successfully run, the SHELL/5/CMDRECORD and SHELL/5/CMDRECORDFAILED logs are recorded.

The SHELL/5/CMDRECORD(l) log is used to record commands that fail to be run during device configuration restoration.

Parameters

Parameter Name Parameter Meaning
Task Indicates the task name. For details about the task name, see description of the display cpu-usage command output for the SHELL/5/CMDRECORD log.
Ip Indicates an IP address.

When the device fails to obtain the user IP address, for example, in a scenario where the user logs in using a Console interface, asterisks (**) are used to indicate the IP address.

VpnName Indicates the name of a VPN instance.
User Indicates the name of a user.

When the device fails to obtain the user name, for example, in a password-based user authentication scenario, asterisks (**) are used to indicate the user name.

For an internal command, if the device fails to obtain the user name, "_system_" is used as the user name in the SHELL/5/CMDRECORD log. If a user uses the password authentication mode for login but the device fails to obtain the user name, "**" is used as the user name in the SHELL/5/CMDRECORD log. If the device fails to obtain the user name, "CFM" is used as the user name in the SHELL/5/CMDRECORD(l) log.

AuthenticationMethod Indicates the authentication mode.
Command Indicates a command.
Result Indicates a command execution result.

Possible Causes

The user command was recorded in the SHELL/5/CMDRECORD log.

The SHELL/5/CMDRECORD(l) log was generated because a command failed to be run during device configuration restoration.

Procedure

  1. This log message is informational only, and no action is required if the command is successfully run. If the command fails to be run, collect log and configuration information, and contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 46912

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next