No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MSTP/4/EDGE_PORT

MSTP/4/EDGE_PORT

Message

MSTP/4/EDGE_PORT:Edged-port [port-name] received BPDU packet, then the active state of the edged-port will be disabled!

Description

After an edge port received a BPDU, the port turned to inactive.

Parameters

Parameter Name Parameter Meaning
[port-name] indicates the name of an edge port.

Possible Causes

The edge port received the BPDU.

Procedure

  • Run the stp edged-port enable command in the interface view to reconfigure the status of the edge port.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 47518

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next