No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



WLAN/3/WLAN_LOG_USER(l):The user chose [[UCHAR1]] when deciding whether to batch config the ap with the incomplete radio profile data.


A user determines whether to configure APs in batches using an incomplete radio profile.


Parameter Name Parameter Meaning
[UCHAR1] Indicates a user operation.
  • Y
  • N

Possible Causes

A user runs the service-batch modify ap-type { id ap-type-id | name ap-type-value } radio radio-id { radio-profile { id radio-profile-id | name radio-profile-name } | service-set id { service-set-id [ to service-set-id ] } &<1-16> } * command.


  • This log message is informational only, and no action is required.
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 73274

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next