No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FW/0/SECLOG_PACKET_FILTER_ID_INFO

FW/0/SECLOG_PACKET_FILTER_ID_INFO

Message

FW/0/SECLOG_PACKET_FILTER_ID_INFO:<[SerialNumber]> [record time] [HOSTNAME] [version/module/level]: -DevIP=[ip-address1]; protocol=[proto]; source-ip=[ip-address2];source-port=[Port1]; destination-ip=[ip-address3]; destination-port=[Port2]; time=[time]; acl=[acl-id]; rule=[rule-id];

Description

The firewall recorded logs generated when it filtered packets passing through the interzone.

Parameters

Parameter Name Parameter Meaning
[SerialNumber] Index of the log.
[record time]

Time when the log is recorded, in the format of YYYY-MM-DD HH:MM:SS.

  • YYYY, MM, and DD indicate the year, month, and date respectively.
  • HH, MM, and SS indicate the hour, minute, and second respectively.
[HOSTNAME] Device name.
[version/module/level]
  • version: Current version of the device.
  • module: Module that generates logs.
  • level: Log level.
[ip-address1] Management IP address of the device.
[proto] Protocol type.
[ip-address2] Source IP address of packets.
[Port1] Source interface of packets.
[ip-address3] Destination IP address of packets.
[Port2] Destination interface of packets.
[time] Time when logs are generated.
[acl-id] ACL used to match packets.
[rule-id] Rule ID in the ACL.

Possible Causes

After interzone packet filtering and log functions were enabled on a firewall, it generated packet filtering logs when packets passed through the interzone.

After interzone packet filtering and log functions are enabled on a firewall, acl-id or rule-id in cache state logs may be abnormal if you change or delete the ACL for the interzone.

Procedure

  1. This message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 59179

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next