No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NTP/6/PEER_SELE

NTP/6/PEER_SELE

Message

NTP/4/PEER_SELE:The peer selected by the system is [source-address].

Description

The IP address of the source reference clock selected by the system was displayed.

Parameters

Parameter Name Parameter Meaning
[source-address] Indicates the IP address of the source reference clock selected by the system.

Possible Causes

1: The system had just selected the source reference clock.

2: The switchover of source reference clocks was performed during clock synchronization.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 62100

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next