No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MSDP/4/SA_LIMIT

MSDP/4/SA_LIMIT

Message

MSDP/4/SA_LIMIT:In VPN instance "[vpn-instance-name]", (S,G) entry whose RP was [rp-address] was ([source-address], [group-address]), it exceeded the peer ([peer-address])'s SA-cache maximum [maximum-number]. (FlCode=[STRING][ULONG])

Description

The number of the (S, G) entries reached the upper limit of the peer SA cache.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[rp-address] Indicates the IP address of the RP.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[peer-address] Indicates the IP address of the peer.
[maximum-number] Indicates the maximum number.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The number of the (S, G) entries reached the upper limit of the peer SA cache.

Procedure

  1. Run the peer peer-address sa-policy { import | export } [ acl advanced-acl-number ] command to configure the policy guiding the receiving and forwarding of SA messages.
  2. Run the peer peer-address sa-cache-maximum sa-limit command to adjust the maximum number of (S, G) entries that can be learned by the device cache from the specified MSDP peer.
  3. End.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 63298

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next