No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN/Notice/APNTOF5

WLAN/Notice/APNTOF5

Message

WLAN/Notice/APNTOF5:AP-[ULONG1] change from normal to fault:\r\nMAC = [UCHAR1]-[UCHAR2]-[UCHAR3]-[UCHAR4]-[UCHAR5]-[UCHAR6], Sysname:[STRING1], Reason: keep-alive timeout.

Description

The AP transited to fault state when data packets were dropped.

Parameters

Parameter Name Parameter Meaning
[ULONG1] Indicates the ID of an AP.
[UCHAR1]-[UCHAR2]-[UCHAR3]-[UCHAR4]-[UCHAR5]-[UCHAR6] Indicates the MAC address of the AP.
[STRING1] Indicates the name of the AP.

Possible Causes

1:

The network between the AC and the AP is disconnected.

2:

The AP is faulty.

3:

The AC is faulty.

Procedure

  1. Ping the AP from the AC to check whether packets can be transmitted.
    • If not, the network is disconnected. Check the network connection.
    • If so, contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 59306

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next