No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



ISIS/6/SB_CIR_NOT_ENABLE:ISIS [process-id] static BFD was not enabled on interface [interface-name].(InterfaceIndex=[STRING])


IS-IS static BFD was not enabled on the interface.


Parameter Name Parameter Meaning


Indicates the ID of an IS-IS process.


Indicates the name of an interface.


Indicates the interface index.

Possible Causes

The static BFD function was not enabled on the interface.


  1. Judge whether the static BFD function needs to be enabled on the interface. If so, go to Step 2; if not, go to Step 3.
  2. Run the isis bfd static command.
  3. End.
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 97738

Downloads: 35

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next