No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ADP-IPSEC/4/FPI_DeleteInBoundSa_Fail

ADP-IPSEC/4/FPI_DeleteInBoundSa_Fail

Message

ADP-IPSEC/4/FPI_DeleteInBoundSa_Fail: Failed to delete inbound SAs from the forwarding plane. (SPI: [ULONG], Proto: [ULONG], peer-ip: [STRING], error code: [ULONG])

Description

The IPSec module failed to delete inbound SAs from the forwarding plane.

Parameters

Parameter Name Parameter Meaning
SPI Indicates the security parameter index (SPI).
Proto Indicates the protocol number.
peer-ip Indicates the IP address of a peer.
error code Indicates the returned error code.

Possible Causes

After the reset ipsec sa command was run in the user view or SAs were aged, the IPSec module failed to delete inbound SAs from the forwarding plane.

Procedure

  • Collect log messages and contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 61740

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next