No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IFNET/4/NTF_ACOAM_STATE_FAIL

IFNET/4/NTF_ACOAM_STATE_FAIL

Message

IFNET/4/NTF_ACOAM_STATE_FAIL:Failed to notify Application module of the AC OAM state change event. (Application=[STRING])

Description

Failed to notify the application module of the event that AC OAM status changed.

Parameters

Parameter Name Parameter Meaning
Application indicates the application module name.

Possible Causes

Failed to notify the application module of the event that AC OAM status changed.

Procedure

  1. Run the display diagnostic-information command, save the command output, and then Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 64006

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next