No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR500, AR510, and AR530 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NHRP/1/NHRP_LOOPBACK

NHRP/1/NHRP_LOOPBACK

Message

NHRP/1/NHRP_LOOPBACK:A LOOPBACK LINK IS DETECTED. (protocol address=[STRING],nbma_address=[STRING],IfIndex=[ULONG])

Description

A loop packet was detected on a spoke (a branch) or hub (the central office).

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the network layer protocol address.
[STRING] Indicates the public address.
[ULONG] Indicates the source interface index.

Possible Causes

A loop packet was detected on a spoke or hub.

Procedure

  1. Check routing information on the spoke or hub.

    Run the display ip routing-table command to check routing information.

  2. Contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097294

Views: 48229

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next